{"id":177,"date":"2026-02-27T02:09:40","date_gmt":"2026-02-27T02:09:40","guid":{"rendered":"https:\/\/sdballs.com\/product\/aisi-420c-stainless-steel-balls\/"},"modified":"2026-06-25T01:16:15","modified_gmt":"2026-06-25T01:16:15","slug":"aisi-420c-stainless-steel-balls","status":"publish","type":"product","link":"https:\/\/sdballs.com\/ru\/product\/aisi-420c-stainless-steel-balls\/","title":{"rendered":"AISI 420C Stainless Steel Balls – Hardened Martensitic Stainless Steel Balls"},"content":{"rendered":"

\u041e\u0431\u0437\u043e\u0440 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/h2>\n\n\n\n

AISI 420C Stainless Steel Balls are hardened martensitic stainless steel balls developed for mechanical systems where hardness and wear resistance are more important than the highest level of corrosion resistance. Compared with austenitic stainless steel balls such as AISI 304 or 316, AISI 420C can be heat treated to a much higher hardness. Compared with AISI 440C, it generally provides slightly lower maximum bearing-grade hardness but can be a practical choice for many special bearing, pump, valve and consumer mechanism applications.<\/p>\n\n\n\n

For buyers, the key value of AISI 420C is balanced performance: hardened stainless structure, good rolling and seating wear resistance, magnetic handling, and usable corrosion resistance in many ordinary industrial media. It is suitable when carbon steel or chrome steel does not provide enough corrosion resistance, but 316 stainless steel is too soft for the mechanical load or wear condition.<\/p>\n\n\n\n

Material Selection & Technical Positioning<\/h2>\n\n\n\n

AISI 420C belongs to the martensitic stainless steel family. It is magnetic and hardenable by heat treatment. This makes it different from AISI 304 and 316 stainless steel balls, which are normally selected mainly for corrosion resistance and are not heat treatable to high hardness in the same way.<\/p>\n\n\n\n

AISI 420C should be selected when the application requires a harder stainless ball for rolling contact, seating, detent, pump, valve, writing instrument or mechanism use. It should not be presented as the best grade for seawater, strong acid, strong chloride, or highly chemical environments. In those conditions, SDBALLS should guide buyers toward 316\/316L stainless steel balls, ceramic balls, or another corrosion-specific solution after confirming the actual media.<\/p>\n\n\n\n

Correct industry terms for this page include: AISI 420C stainless steel balls, 420C stainless balls, hardened martensitic stainless steel balls, magnetic stainless steel balls, corrosion resistant steel balls, stainless bearing balls, pump valve balls, and stainless steel balls for special bearings.<\/p>\n\n\n\n

\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/h2>\n\n\n\n
\u0421\u0432\u043e\u0439\u0441\u0442\u0432\u043e<\/strong><\/td>Typical Content for Product Page<\/strong><\/td><\/tr>
Material Grade<\/td>AISI 420C<\/td><\/tr>
\u0421\u0442\u0440\u0443\u043a\u0442\u0443\u0440\u0430<\/td>Hardened martensitic stainless steel<\/td><\/tr>
\u0422\u0432\u0435\u0440\u0434\u043e\u0441\u0442\u044c<\/td>HRC 52-60 after heat treatment<\/td><\/tr>
\u041f\u043b\u043e\u0442\u043d\u043e\u0441\u0442\u044c<\/td>Approx. 7.75 g\/cm3<\/td><\/tr>
Young’s Modulus<\/td>Approx. 205 GPa<\/td><\/tr>
\u041f\u0440\u0435\u0434\u0435\u043b \u043f\u0440\u043e\u0447\u043d\u043e\u0441\u0442\u0438<\/td>Approx. 1700-1900 MPa; reference value depending on heat treatment and material condition<\/td><\/tr>
\u041c\u0430\u0433\u043d\u0435\u0442\u0438\u0437\u043c<\/td>Magnetic \/ ferromagnetic<\/td><\/tr>
\u041a\u043e\u0440\u0440\u043e\u0437\u0438\u043e\u043d\u043d\u0430\u044f \u0441\u0442\u043e\u0439\u043a\u043e\u0441\u0442\u044c<\/td>Good practical corrosion resistance in fresh water, steam, industrial atmosphere, organic compounds and mild acidic environments; not recommended for seawater immersion or strong acids<\/td><\/tr>
\u041e\u0442\u0434\u0435\u043b\u043a\u0430 \u043f\u043e\u0432\u0435\u0440\u0445\u043d\u043e\u0441\u0442\u0438<\/td>Polished, passivated, oiled, or customized surface condition upon request<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Chemical Composition Reference<\/h2>\n\n\n\n
\u041e\u0446\u0435\u043d\u043a\u0430<\/strong><\/td>C %<\/strong><\/td>Si %<\/strong><\/td>Mn %<\/strong><\/td>P max %<\/strong><\/td>S max %<\/strong><\/td>Cr %<\/strong><\/td>Mo %<\/strong><\/td><\/tr>
AISI 420C<\/td>0.43-0.50<\/td>1.00 \u043c\u0430\u043a\u0441.<\/td>1.00 \u043c\u0430\u043a\u0441.<\/td>0.040<\/td>0.030<\/td>12.50-14.50<\/td>\u2013<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Note: Composition ranges are reference values for product-page specification. Final material confirmation should follow the agreed standard, purchase order, inspection plan and mill certificate when required.<\/p>\n\n\n\n

International Grade Equivalents<\/h2>\n\n\n\n
\u0421\u0428\u0410<\/strong><\/td>China<\/strong><\/td>Germany<\/strong><\/td>France<\/strong><\/td>Italy<\/strong><\/td>\u0412\u0435\u043b\u0438\u043a\u043e\u0431\u0440\u0438\u0442\u0430\u043d\u0438\u044f<\/strong><\/td>Russia<\/strong><\/td>Japan<\/strong><\/td><\/tr>
AISI 420C<\/td>4Cr13<\/td>1.4034<\/td>Z34C14<\/td>X46Cr13<\/td>\u2013<\/td>40Kh13<\/td>\u2013<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Note: International equivalents are provided for buyer reference only. Exact equivalence can vary by standard revision and chemical range. For engineering projects, drawings, material standards and certificates should be confirmed before production.<\/p>\n\n\n\n

Heat Treatment, Hardness & Performance<\/h2>\n\n\n\n

AISI 420C stainless steel balls are supplied in a hardened condition to reach the typical hardness range of HRC 52-60. The higher carbon level compared with lower 420 grades supports improved hardenability and wear resistance while retaining the practical corrosion behavior of a chromium stainless steel.<\/p>\n\n\n\n

The hardened martensitic structure helps the ball resist deformation and wear under repeated rolling, seating and contact cycles. This makes AISI 420C suitable for special bearings, pump components, automotive mechanisms and precision consumer parts where mechanical durability is important.<\/p>\n\n\n\n

Corrosion performance should be specified carefully. AISI 420C performs well in many industrial atmospheres, fresh water, steam, organic compounds, dairy-related media and mild acidic environments, and may be suitable in alkaline or salt-atmosphere exposure when not immersed in seawater. It is not recommended for direct seawater contact, strong acids, or aggressive chloride environments.<\/p>\n\n\n\n

Applications & Application Fit<\/h2>\n\n\n\n
\u041f\u0440\u0438\u043b\u043e\u0436\u0435\u043d\u0438\u0435<\/strong><\/td>Fit Level<\/strong><\/td>Why It Fits<\/strong><\/td>Buyer Note<\/strong><\/td><\/tr>
Special bearings \/ anti-friction components<\/td>Very good<\/td>Hardened stainless structure supports rolling wear resistance and dimensional stability<\/td>Confirm grade, load, speed and lubrication requirement<\/td><\/tr>
Pump valve balls \/ check components<\/td>Very good<\/td>Good hardness and practical corrosion resistance in fresh water, steam and many common fluids<\/td>Confirm media, temperature, sealing seat material and corrosion risk<\/td><\/tr>
Automotive seatbelt components<\/td>\u0425\u043e\u0440\u043e\u0448\u0438\u0439<\/td>Magnetic stainless ball with stable hardness for repeated mechanism function<\/td>Confirm safety-related specifications, PPAP or inspection documentation if needed<\/td><\/tr>
Lighters and consumer mechanisms<\/td>\u0425\u043e\u0440\u043e\u0448\u0438\u0439<\/td>Wear resistance and smooth surface support repeatable movement<\/td>Confirm surface finish, size tolerance and packing cleanliness<\/td><\/tr>
Ballpoint pens \/ writing instruments<\/td>\u0425\u043e\u0440\u043e\u0448\u0438\u0439<\/td>Consistent geometry and wear resistance support rolling and seating function<\/td>Confirm miniature size tolerance, finish and cleanliness<\/td><\/tr>
Food or dairy adjacent equipment<\/td>Conditional<\/td>AISI 420C can work in some food-related environments but is selected mainly for hardness<\/td>Confirm whether 304\/316 is required by hygiene or corrosion specification<\/td><\/tr>
Seawater \/ strong acid \/ aggressive chloride media<\/td>Limited \/ not recommended<\/td>420C does not provide the corrosion resistance needed for these environments<\/td>Consider 316\/316L, ceramic balls, or corrosion-special materials<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Material Selection Guide<\/h2>\n\n\n\n
Material Option<\/strong><\/td>Typical Strength<\/strong><\/td>Limitation<\/strong><\/td>When to Recommend<\/strong><\/td><\/tr>
AISI 420C stainless steel balls<\/td>Hardened martensitic stainless, HRC 52-60, good wear resistance, magnetic<\/td>Not suitable for seawater or strong acids; lower corrosion resistance than 316<\/td>Special bearings, pumps, valve parts, seatbelt components, lighters, pens<\/td><\/tr>
AISI 420A\/420B stainless steel balls<\/td>Hardenable martensitic stainless with moderate hardness and wear resistance<\/td>Lower hardness than 420C in many specifications<\/td>Applications needing magnetic stainless balls with moderate hardness<\/td><\/tr>
AISI 440C stainless steel balls<\/td>Highest common stainless bearing hardness and strong rolling fatigue performance<\/td>Higher cost; corrosion resistance still not equal to 316 in chloride media<\/td>Precision bearings, high-load stainless bearing assemblies, pump and valve systems<\/td><\/tr>
AISI 304\/316 stainless steel balls<\/td>Better corrosion resistance and clean appearance; 316 especially stronger in many chemical\/chloride environments<\/td>Lower hardness and wear resistance than martensitic grades<\/td>Food, medical, marine-adjacent, chemical and hygiene-sensitive applications<\/td><\/tr>
AISI 52100 chrome steel balls<\/td>High hardness, precision and bearing performance at competitive cost<\/td>Not stainless; requires rust protection<\/td>Dry or protected precision bearings and high-performance rolling assemblies<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Manufacturing & Process Control<\/h2>\n\n\n\n

SDBALLS controls AISI 420C stainless steel ball production through raw material selection, wire preparation, cold heading, flashing, heat treatment, hard grinding, lapping when required, polishing, cleaning, passivation or rust protection when specified, inspection and export packing.<\/p>\n\n\n\n

For hardened martensitic stainless steel balls, heat treatment and finishing consistency are especially important. Hardness, roundness, surface condition and size accuracy directly affect rolling behavior, sealing contact, mechanism smoothness and product service life.<\/p>\n\n\n\n

For OEM programs, SDBALLS can confirm the correct grade, hardness, surface finish, precision grade, documentation and packing method before mass production, helping buyers avoid over-specification or unsuitable material selection.<\/p>\n\n\n\n

Quality Control & Inspection<\/h2>\n\n\n\n

Typical inspection items for AISI 420C stainless steel balls include diameter, grade, roundness, surface appearance, hardness, material confirmation, roughness when specified, passivation or surface condition, cleanliness, packing condition and batch traceability.<\/p>\n\n\n\n

For applications such as automotive components, pumps, special bearings, writing instruments or OEM assemblies, buyers may request sample approval, inspection reports, PPAP-style documentation, RoHS statements, third-party testing or customized labeling. Inspection scope should be confirmed before quotation and production.<\/p>\n\n\n\n

Packing Options<\/h2>\n\n\n\n

SDBALLS can supply AISI 420C stainless steel balls in bulk bags, cartons, pails, drums, wooden cases, pallets or customized OEM packing. Packing can be selected according to ball size, quantity, cleanliness requirement, transportation method and customer warehouse handling practice.<\/p>\n\n\n\n

For small precision sizes, clean inner bags and protected cartons are recommended. For large-volume industrial supply, drum or pallet packing can reduce handling cost. Customized labels can include material grade, diameter, precision grade, quantity, batch number, customer part number and destination information.<\/p>\n\n\n\n

How to Specify for Quotation<\/h2>\n\n\n\n

To quote accurately, please confirm: material grade (AISI 420C or equivalent), diameter in mm or inch, precision grade, hardness range, surface finish, passivation or oiling requirement, corrosion environment, quantity, packing method, application, drawing or sample availability, inspection document requirement, destination port and trade term.<\/p>\n\n\n\n

For replacement projects, buyers are encouraged to provide drawings, current supplier specification sheets, photos, samples, hardness requirement, working media, temperature, load, speed and corrosion exposure details. This helps SDBALLS confirm whether AISI 420C is suitable or whether 440C, 316, ceramic or another material should be recommended.<\/p>\n\n\n\n

Technical FAQ<\/h2>\n\n\n\n

Q: What is AISI 420C stainless steel ball?<\/strong><\/p>\n\n\n\n

A: AISI 420C stainless steel ball is a hardened martensitic stainless steel ball. It provides high hardness, good wear resistance, magnetic response and practical corrosion resistance for many mechanical applications.<\/p>\n\n\n\n

Q: Is AISI 420C magnetic?<\/strong><\/p>\n\n\n\n

A: Yes. AISI 420C is a martensitic stainless steel and is magnetic. This can be useful for automated feeding, magnetic sorting and assembly systems.<\/p>\n\n\n\n

Q: What hardness can SDBALLS supply for AISI 420C balls?<\/strong><\/p>\n\n\n\n

A: The typical hardened hardness range is HRC 52-60. If a narrower hardness range is required, it should be confirmed before quotation and sample approval.<\/p>\n\n\n\n

Q: Is AISI 420C more corrosion resistant than 304 or 316 stainless steel?<\/strong><\/p>\n\n\n\n

A: No. AISI 420C is selected mainly for hardness and wear resistance. AISI 304 and especially AISI 316 are usually better choices for corrosion-focused environments, food-contact requirements, chemical exposure or chloride-rich media.<\/p>\n\n\n\n

Q: What is the difference between AISI 420C and AISI 440C stainless steel balls?<\/strong><\/p>\n\n\n\n

A: Both are martensitic stainless steel grades. AISI 440C usually offers higher hardness and stronger bearing-grade performance, while AISI 420C can be a practical hardened stainless option for special bearings, pumps, valve parts and consumer mechanisms where the full performance of 440C is not required.<\/p>\n\n\n\n

Q: Can AISI 420C stainless steel balls be used in seawater?<\/strong><\/p>\n\n\n\n

A: AISI 420C is not recommended for seawater immersion or aggressive chloride environments. For marine or strong corrosion conditions, buyers should consider 316\/316L stainless steel, ceramic balls or another corrosion-specific material.<\/p>\n\n\n\n

Q: What applications commonly use AISI 420C stainless steel balls?<\/strong><\/p>\n\n\n\n

A: Common applications include special bearings, automotive seatbelt components, pump and valve parts, lighters, ballpoint pens, recirculating components and industrial mechanisms requiring hardness plus practical corrosion resistance.<\/p>\n\n\n\n

Q: What information is needed for a quotation?<\/strong><\/p>\n\n\n\n

A: Please provide material grade, diameter, precision grade, hardness, surface finish, quantity, packing method, application, working environment, inspection document requirement, destination and trade term.<\/p>","protected":false},"excerpt":{"rendered":"

\u041e\u0431\u043b\u0430\u0434\u0430\u0435\u0442 \u0432\u044b\u0441\u043e\u043a\u043e\u0439 \u0442\u0432\u0435\u0440\u0434\u043e\u0441\u0442\u044c\u044e \u0438 \u0445\u043e\u0440\u043e\u0448\u0435\u0439 \u0438\u0437\u043d\u043e\u0441\u043e\u0441\u0442\u043e\u0439\u043a\u043e\u0441\u0442\u044c\u044e \u043f\u043e\u0441\u043b\u0435 \u0442\u0435\u0440\u043c\u043e\u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0438, \u0447\u0442\u043e \u0434\u0435\u043b\u0430\u0435\u0442 \u0435\u0433\u043e \u0448\u0438\u0440\u043e\u043a\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u043c\u044b\u043c \u0432 \u043f\u043e\u0434\u0448\u0438\u043f\u043d\u0438\u043a\u0430\u0445, \u043a\u043b\u0430\u043f\u0430\u043d\u0430\u0445 \u0438 \u043f\u0440\u0435\u0446\u0438\u0437\u0438\u043e\u043d\u043d\u044b\u0445 \u043a\u043e\u043c\u043f\u043e\u043d\u0435\u043d\u0442\u0430\u0445.<\/p>","protected":false},"featured_media":3817,"parent":0,"menu_order":6,"template":"","meta":{"_acf_changed":true,"_gspb_post_css":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kad_post_transparent":"default","_kad_post_title":"","_kad_post_layout":"fullwidth","_kad_post_sidebar_id":"","_kad_post_content_style":"unboxed","_kad_post_vertical_padding":"hide","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":""},"product-category":[4],"class_list":["post-177","product","type-product","status-publish","has-post-thumbnail","hentry","product-category-stainless-steel-ball"],"acf":[],"taxonomy_info":{"product-category":[{"value":4,"label":"Stainless Steel Ball"}]},"featured_image_src_large":["https:\/\/sdballs.com\/wp-content\/uploads\/2026\/02\/image1-3-1024x1024.png",1024,1024,true],"author_info":[],"comment_info":"","_links":{"self":[{"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/product\/177","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/media\/3817"}],"wp:attachment":[{"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/media?parent=177"}],"wp:term":[{"taxonomy":"product-category","embeddable":true,"href":"https:\/\/sdballs.com\/ru\/wp-json\/wp\/v2\/product-category?post=177"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}